Author Topic: Trek Navigator 100 Frame + Parts  (Read 3840 times)

0 Members and 1 Guest are viewing this topic.

Offline OUWxGuesser

  • UND
  • *
  • Posts: 295
  • Karma: 13
Trek Navigator 100 Frame + Parts
« on: August 30, 2011, 11:58:01 am »
Found an abandoned Trek Navigator 100 near Clifford Hall on Friday.  Although it is a men's frame, I thought it would work for the wife so I was going to turn it into a project. Unfortunately, it's a hair too large for her.  Haven't measured it, but my guess is the frame size is around a 18"  Standover is right around 30 inches.

I disassembled everything to clean things up. Only thing left on the frame is the BB which could use some work. 

Things in good shape:
Frame (a few scuffs, no dents/damage)
Seatpost/Saddle (one of those wide "comfort" ones)
Wheels (26", tires have good tread)
Crank/cassette
Derailleurs (SRAM 3.0)
Brakes (basic Tektros)

Things that need/should to be replaced:
Front Fork (I was going to put a rigid one on)
I'd also put a new headset/stem/handlebar as the old stuff is very heavy.
New shifters / brake levers and cables.


If any of you could use the stuff, let me know and you can have it!  I can't justify building something up for me because i'm not a fan of the geometry.



« Last Edit: August 30, 2011, 11:58:47 am by OUWxGuesser »

Offline Sal Atticum

  • Administrator
  • *****
  • Posts: 7116
  • Karma: 38
  • Gender: Male
    • Campus Dakota
Re: Trek Navigator 100 Frame + Parts
« Reply #1 on: September 09, 2011, 09:38:55 am »
Are the chainrings removable, or are they welded together onto the crank?  I could use some new chainrings for my mountain bike.  If it looks like the chainrings would fit the spider on your mtb, maybe I can stop over sometime tonight.
JUST EXTRA POLISH. I DO SOME WORK WITH EXCELL SO I KEEP THE CAPS LOCK ON :-P

Offline OUWxGuesser

  • UND
  • *
  • Posts: 295
  • Karma: 13
Re: Trek Navigator 100 Frame + Parts
« Reply #2 on: September 09, 2011, 11:05:28 pm »
It's a cheapo Shimano everything welded together dealie. 

Kevin mende

  • Guest
Re: Trek Navigator 100 Frame + Parts
« Reply #3 on: September 22, 2011, 05:45:30 pm »
Hi there. I am in need of sprocket and hits for my navigator 100. Would you be willing to ship to me for a fee?

Kevin Mende

  • Guest
Re: Trek Navigator 100 Frame + Parts
« Reply #4 on: September 23, 2011, 10:13:14 am »
After a little research I've figured out the correct names for the parts I need.  I am in need of the crankset, and all accompanying parts, including: The shaft, cups, caps, bearings, and pedals.  Are these parts available, and would you be willing to ship to me?

Thanks for your consideration.

Kevin

Offline OUWxGuesser

  • UND
  • *
  • Posts: 295
  • Karma: 13
Re: Trek Navigator 100 Frame + Parts
« Reply #5 on: September 23, 2011, 03:40:07 pm »
Kevin, I'll look up what exact parts are on it.  Honestly, for the price of shipping, you may be able to get brand-spanking new parts for not much more from an online discount place.  The bottom bracket which the crank attaches too probably needs to be replaced, however, I may be able to make it usable after a thorough cleaning.  Good thing my tool to do this came today :)

Offline OUWxGuesser

  • UND
  • *
  • Posts: 295
  • Karma: 13
Re: Trek Navigator 100 Frame + Parts
« Reply #6 on: September 24, 2011, 01:36:55 pm »
The bottom bracket is shot. Matter of fact, I'm going to have to take it to a bike shop to get one side off.  What year is your Navigator?

 

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Name: Email:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image
Type the letters shown in the picture:
What color is an apple, it starts with an r?:
What is 5 plus 5?:
What is UND's new athletic nickname?:

anything
realistic
anything