Posted by: Plantains
« on: March 04, 2010, 02:23:24 PM »That whole thing about levers being designed for a triple or a double is fudgy. A derailleur isn't indexed per se, it is simply built with a range in mind. This is further adjusted by the limit screws. The brifter is indexed though, but this indexing is range dependent. By that I mean that if you have a triple brifter, and a double chainring, the brifter won't know how many gears there are and so long as the limit screws and cable tension is adjusted properly, it will work fine.
My Sram RED in fact has 3 clicks. Sram calls this "trim" but really it adapts to a triple easier. My 105 triple group (which I was running double FSA cranks on) worked pretty much EXACTLY the same as my red (albeit not anywhere CLOSE to as precise (but thats a 105 vs. red issue)). When I was in the big ring, I could downshift 1 click and the chain wouldn't shift, the derailleur would just trim. If I went another click, it would jump down to the 39 ring. If I then up shifted 1 click, it would trim, and if I upshifted 2 clicks, it would jump back to the 53.
The purpose of the trim is because running a double with a 10-speed cassette on the back requires the chain to move through such a wide range, this effectively enables you to "crosschain" your system without the derailleur interfering. (though it doesn't do anything to destress the chain really)
So yeah, there won't be any issue running a double crank on a triple group. But as I mentioned earlier... it won't necessarily make adjusting things any easier.
My Sram RED in fact has 3 clicks. Sram calls this "trim" but really it adapts to a triple easier. My 105 triple group (which I was running double FSA cranks on) worked pretty much EXACTLY the same as my red (albeit not anywhere CLOSE to as precise (but thats a 105 vs. red issue)). When I was in the big ring, I could downshift 1 click and the chain wouldn't shift, the derailleur would just trim. If I went another click, it would jump down to the 39 ring. If I then up shifted 1 click, it would trim, and if I upshifted 2 clicks, it would jump back to the 53.
The purpose of the trim is because running a double with a 10-speed cassette on the back requires the chain to move through such a wide range, this effectively enables you to "crosschain" your system without the derailleur interfering. (though it doesn't do anything to destress the chain really)
So yeah, there won't be any issue running a double crank on a triple group. But as I mentioned earlier... it won't necessarily make adjusting things any easier.

